(中南工業大學資源環境與建筑工程學院， 410083)
摘 要: 為了測定鋁電解槽槽殼位移隨時間的變化規律和為計算槽殼內壁的受力大小 提供位移向量，用自行研制的位移傳感器和機械式位移計對某廠大型鋁電解槽進行現場測試，采集了大量實測數據。由所得的位移特征曲線可知，槽殼大面中部最大位移為18.5 mm，小面中部最大位移為12.0 mm。
關鍵字: 鋁電解槽 位移傳感器 機械式位移計 法向位移
（College of Resource Environment and Civil Engineering,
Central South University of Technology, Changsha 410083）
Abstract:In order to measure the change rule of the shell of an aluminium electrolyzer and provide the displacement vector for calculating the stress on inner shell, the displacement sensor and the mechanical displacement instrument have been made and have been gotten a lot of results. From the displacement curve formed by these results, it can be known that the largest displacement of the central part of big shell surface was 18.5 mm and that of small shell surface was 12.00 mm.
Key words: aluminium electrolyzer displacement sensor mechanical displacement
instrument normal displacement
