(中南工業大學有色冶金系，長沙 410083)
摘 要: 對在稀鹽酸中以黃鐵礦作還原劑的太平洋錳結核浸出過程進行了研究，探討 了黃鐵礦與錳結核的質量比(R)、初始鹽酸濃度、液固比(L/ S)和浸出溫度等諸因素對錳結核中有價金屬元素Cu、Ni、Co、Mn及Fe浸出的影響。結果表明，當R為0.3，C初(HCl) 1.5 mol/L，L/S 10∶1，90 ℃及浸提90 min的情況下，Cu、Ni、Co、Mn、Fe浸出率分別為95.77%、93.80%、96.80%、89.09%、49.06%；而當C初(HCl)為 1.0 mol/L，其它條件相同，金屬提取率分別為91.84%、89.60%、86.67%、80.83%、0.63%。錳結核原料中 Si、 Al等雜質元素浸出后存留在浸出渣中。
關鍵字: 濕法提取 錳結核 黃鐵礦
（Department of Nonferrous Metallurgy,
Central South University of Technology, Changsha 410083）
Abstract:The leaching of pacific ocean nodule was conducted in dilute HCl by pyrite as reductant. Some factors, for example pyrite/nodules ratio in mass(R), initial HCl concentration, liquid to solid ratio(L/S), the temperature for leaching etc were investigated on the extractions of valuable metals Cu, Ni, Co, Mn & Fe contained in nodule. The results indicated that in the condition of R 0.3, C(HCl)1.5 mol/L, L/S 10∶1 and leaching at 90 ℃ for 90 min, the extraction ratios of Cu, Ni, Co, Mn and Fe were 95.77%, 93.80%, 96.80%, 89.09% and 49.06% respectively, whereas C (HCl) 1.0 mol/L and other conditions as above, the extraction ratios were 91.84%, 89.60%, 86.67%, 80.83% and 0.63%. The Si and Al contained in nodules existed in the residues instead of dissolution.
Key words: hydrometallurgy ocean nodule pyrite
