(北京有色金屬研究總院， 北京 100088)
摘 要: 在材料織構定量分析的基礎上，由織構級數展開系數計算金屬板材的成型性參數，如塑性應變比R 值與泰勒因子M 等。通過物理數學模型的選擇，提出了改進的簡化數模。采用Bunge符號系統與晶體學處理方法，建立了測算織構金屬材料的成型性參數的新方法。理論預測與力學性能測試的結果相一致，證實了該法的準確性和可靠性。
關鍵字: 成型性參數 織構 ODF R M
（Beijing General Research Institute for Nonferrous Metals, Beijing 100088）
Abstract:Based on the development of the Quantitative Texture Analysis (QTA) of materials, the calculation of formability parameters such as plastic strain ratio R and the Taylor factor M of sheet metals from series expansion Coefficients of texture have been studied. A simplified mathematic model has been proposed by choosing suitable physicomathematic model, and a new method to calculate form ability parameters of texture metal materials has been given using Bunge symbol system and cystallology process method. The prediction results agree well with experimental data from a steel sheet.
Key words: formability parameters software system texture ODF R M
