(北京工業大學 國家教育部功能材料重點實驗室，北京 100124)
摘 要: 采用先進的放電等離子燒結技術(SPS)制備N(xiāo)i7W合金初始坯錠，通過優化高能球磨和燒結工藝以及后續和熱處理工藝制備出高度立方織構的Ni7W合金基帶。利用電子背散射衍射(EBSD)技術對Ni7W合金基帶的晶粒取向、晶界特征等信息進行采集和分析，對其織構進行了表征。該基帶無需拋光，即可獲得高花樣質量的電子背散射衍射圖像。EBSD測試結果表明：該Ni7W基帶表面10˚以?xún)?nèi)立方織構晶粒質量分?jǐn)?shù)高達99.4%，10˚以?xún)?nèi)晶界長度質量分?jǐn)?shù)為93.6%，具有高質量的立方織構。
關鍵字: Ni-7%W基帶(Ni7W)；立方織構；涂層導體
coated conductor
GAO Pei-kuo, WANG Jian-hong, ZHOU Mei-ling
（）
Abstract:The cube textured Ni-7%W substrates were prepared by spark plasma sintered (SPS) ingot, followed by rolling-assisted biaxially textured substrate (RABiTS) processing. The grain orientation data and the grain boundaries information of the Ni-7%W(Ni7W) substrate were collected by electron backscatter diffractometry (EBSD). The texture of the Ni7W substrate was analyzed. The high quality of EBSD image is observed on the sample surface after annealing process without polishing. The Ni7W substrate forms a sharp cube texture, and the mass fraction and length fraction of the cube texture grains in the Ni7W substrate reach 99.4% and 93.6%, respectively, within tolerance angle smaller than 10˚.
Key words: Ni-7%W substrate (Ni7W); cube texture; coated conductor
