(1.哈爾濱工業大學金屬精密熱加工國防科技重點實驗室，哈爾濱 150001;
2.中國航天工業總公司第二研究院， 北京 100039)
摘 要: 應用自行開發的鑄件充型及凝固模擬系統，對鋁合金石膏型精密鑄件的凝固過程進行了數值模擬。 采用自行設計制備的多通道自動測溫裝置，對所模擬的鑄件進行現場測溫。為了提高模擬精度，對鑄件-鑄型熱物性參數進行了實測，并采用最小二乘法進行擬合。 通過計算機模擬預測了鑄件的縮孔區，分析了鑄件缺陷產生的原因， 提出了合理的工藝方案， 消除了鑄件內縮孔的發生。實驗驗證的結果表明， 數值模擬結果與測試值擬合較好。
關鍵字: 鋁合金 精密鑄件 凝固過程 數值模擬 實驗驗證
（1.National Defense S and T Key Lab of Metal Precision Hot Working ,Harbin Institute of Technology, Harbin 150001, P. R. China
2.The 2nd Research Institute of Aerospace Industries Co of China, Beijing 100039, P. R. China）
Abstract:Using independently developed software system for numerical simulation of mold filling and solidification of castings, numerical simulation during solidification process of the precision casting of Al alloy in gypsum mold was completed. Adapting self-designed multi-channel apparatus for examining temperature, the temperature of simulated casting was measured. In order to improve simulation accuracy, casting-mold thermophysical parameters were measured on the spot, and approached by using least squared method. According to the results of computer simulation, the shrinkage in casting was predicted and the reasons of the casting defects were investigated. The shrinkage was eliminated after technological redesign. Besides, the experimental and simulated results were found to be in good agreement.
Key words: precision casting of Al alloy solidification process numerical simulation
experimental verification
