(*中南工業大學材料科學與工程系，長沙 410083;
**長沙鐵道學院機電工程學院，長沙 410075)
摘 要: 通過對Mo、Si混合粉末的機械球磨，研究了不同球磨條件對MoSi2形成的影響。 用X射線衍射儀、透射電鏡和掃描電鏡對不同球磨時間的粉末進行了檢測與分析， 結果表明， 在較低球料比的條件下(10∶1)，不同轉速的球磨均會使Si固溶于Mo中， 形成Mo(Si)過飽和固溶體， 但較低轉速(100 r/min)的球磨不能發生合金化而形成MoSi2， 只有較高轉速(225 r/min)的球磨才會通過機械誘發擴散固溶而逐漸形成MoSi2； 在較高球料比的條件下(20∶1)， MoSi2是通過機械誘發自蔓延反應而形成的。
關鍵字: 機械合金化 二硅化鉬 擴散 固溶 自蔓延反應
（* Department of Materials Science and Engineering, Central South University of Technology, Changsha 410083, P. R. China
** Electromechamic Engineering College, Changsha Railway University, Changsha 410075, P. R. China）
Abstract:The mixture of Mo and Si powders was milled by mechanical ball milling. The effect of ball milling conditions on the formation of MoSi2 was systematically investigated. The milled powders with various milling times were charactericed by X-ray diffraction, transmission electron microscopy(TEM) and scanning electron microscopy (SEM). The results showed that ball milling results in the supersaturated solid solution of Mo(Si) under combination of low rotation speed and low ball-to-powder mass ratio(10∶1). MoSi2 could only be formed under the condition of high rotation speed(225 r/min). The formation o f MoSi2 during mechanical alloying was characterized by diffusion and solid solution. On the other hand, MoSi2 was formed via the mechanically-induced self-propagating reaction under condition of high ball-to-powder mass ratio(20∶1).
Key words: mechanical alloying MoSi2 diffusion sol id solution self-propagating reaction
