(中南工業大學冶金系， 長沙 410083)
摘 要: 闡述了濕法煉鋅過程中， 由于電解液中雜質的波動對鋅電積過程主要技術經濟指標產生的嚴重影響， 分析了金屬雜質、骨膠濃度與陰極過電位和電流效率的關系， 提出了利用陰極過電位對鋅電積最佳添加劑濃度及新液質量的控制方法。根據電極過程動力學原理，發明了電解液質量在線監控的方法和裝置， 以實現自動控制添加劑的加入。 實際應用結果表明， 這種在線控制方法與傳統的經驗控制法相比，可使每噸析出鋅電耗減少50.96～101.92 kWh， 電流效率提高2個百分點，鋅電積車間酸霧濃度降低30%～50%， 提高特高品級電鋅產量，大大降低剝鋅勞動強度。
關鍵字: 關鍵詞: 鋅電積 添加劑 自動控制
（Department of Nonferrous Metallurgy,Central South University of Technology, Changsha 410083, P. R. China）
Abstract:In the hydrometallurgical process of zinc, the f luctuation of impurities concentration in the electrolyte has a serious influence on technical parameters. The dependence of cathodic overpotential and current efficiency on metal impurities and glue was studied. Accordingly, a method to control the impurity concentration and glue addition by measuring cathodic overpotential was invented. With this technique the additives can be automatically added and the electrolyte quality be kept under on-line control. The result of its application showed that, compared with the conventional operation, the energy consumption decreased by 50.96~101.92 kWh, current efficiency increased by 2%, and the concentration of acid smog reduced by 30%~50%. At the same time, the quality of electrolytic zinc was improved and zinc could be stripped readily.
Key words: zinc electrodeposition additive automatic control
