(南方冶金學院材料工程系， 贛州 341000)
摘 要: 應用工程法對雙金屬管襯拉復合過程進行了分析，提出了雙金屬管襯拉時的三種流動模式及幾何判據： (1) 當0≤β＜β0時， 為復層變薄流動模式；(2) 當β0＜β≤α?xí)r， 為芯層變薄流動模式； (3) 當β=β0時， 為比例流動模式。推導出了雙金屬管襯拉拉拔力的計算公式。 結果表明， 理論計算值與實測值的相對誤差約小于15%。
關鍵字: 關鍵詞: 雙金屬管 襯拉 拉拔力 工程法
（Department of Materials Engineering, Southern Institute of Metallurgy,Gangzhou 341000, P. R. China）
Abstract:It was analysed theoretically that the loads of bimetal tube drawing with a fixed plug by using slab method, and its three flow models and corresponding geometry criteria were proposed: (1) while 0≤β＜β0, it is the model of the coating getting thinner;(2) while β0＜β≤α, it is the model of the core getting thinner;(3) while β=β0, it is the model of homogenous flow. A formula on loads for bimetal tube drawing with a fixed plug is derived, experimental results show that the relative errors between theorectical values and the measured ones are about less than 15%, which can meet the demands of engineering calculation.
Key words: bimetal tube drawing with a fixed plug drawing loads
slab method
