(中南工業大學材料科學與工程系， 長沙 410083)
摘 要: 采用硬度、 金相和透射電鏡等分析測試手段研究了一種Al-Mg-Sc合金的再結晶溫度和再結晶形核機制。 結果表明： 合金的再結晶起始溫度為375 ℃， 終了溫度為520 ℃； 合金再結晶溫度高的原因是細小彌散的Al3Sc質點對位錯和亞晶界的釘扎作用； 合金的再結晶形核機制為亞晶合并和亞晶長大的雙重作用。
關鍵字: 關鍵詞: Al-Mg-Sc合金 再結晶 鈧 形核
（Department of Materials Science and Engineering,Central South University of Technology, Changsha 410083, P. R. China）
Abstract:
The recrystallizing temperature and nucleation mechanism of an Al-Mg-Sc alloy have been studied by hardness measurement, optical microscope and transmission electron microscope. The results show that the starting temperature point is 375 ℃ while the ending temperature point is 520 ℃ in the recrystallization of the alloy. The increase in recrystalliz ing temperature is caused by the pinning effect of highly dispersed Al3Sc precipitates on dislocation and subgrain boundary. The recrystallizing process presents itself the nucleation mechanism of the alloy involving not only the subgrain coalescence but also the subgrain growth.
Key words: Al-Mg-Sc alloy recrystallization scandium nucleation
