復合涂層的微觀組織
(哈爾濱工業大學材料科學與工程學院， 哈爾濱 150001;
* 北京理工大學機械工程學院)
摘 要: 用連續波CO2激光在45#鋼表面熔覆TiC+Ni-Cr-B-Si-C復合涂層。 微觀組織分析表明： 在熔覆過程中， TiC顆粒表面發生部分溶解， 當凝固時， 重新外延生長出TiCr， 并固溶基體元素； 與純合金涂層相比， 復合涂層中TiC顆粒的加入導致基體組織為條狀CrB相間分布在Ni固溶體構成的羽毛狀簇團組織， 并伴有少量的Ni枝晶間Ni+M23C6共晶。
關鍵字: 關鍵詞: 激光熔覆 TiC顆粒 Ni基合金 復合涂層
（ School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China;
* Department of Mechanical Engineering, Beijing Institute of Technology, P. R. C hina）
Abstract:A continuous wave CO2 laser was used to clad TiC +Ni-Cr-B-Si-C composite coating on AISI1045 steel substrate. The microstructure of the clad was invest igated. The results showed that TiC particles slightly dissolved within the matrix melt, and the dissolved TiC epitaxially recrystallized on the surface of the remaining TiC particles, in which alloying elements of the matrix were solid solved. As compared with the Ni-Cr-B-Si-C clad, the matrix produced a microstructure of CrB laths distributed in the Ni solid solution and a small amount of Ni + M23C6 eutectic between Ni dendrites after the TiC particles were added.
Key words: laser cladding TiCp particles Ni based alloy composite coating
