(北京有色金屬研究總院，北京 100088)
摘 要: 采用化學共沉淀法制備了立方結構的銦錫氫氧化物納米粉。 250℃熱處理后銦錫氫氧化物由晶態轉化為非晶態， 然后隨著溫度升高逐漸轉變?yōu)榫哂辛⒎浇Y(jié)構的銦錫氧化物納米粉。 600 ℃熱處理1h后粉末粒度為10～20 nm，銦錫質量比接近9∶1。 銦錫氧化物顆粒接近球形， 分散性好。
關鍵字: 銦錫氧化物 納米粉 微結構
（General Research Institute for Non-Ferrous Metals, Beijing 100088, P. R. China）
Abstract:Chemical co-precipitaton method was used to prepare indium tin hydroxide with cubic lattice. The cubic crystal structure transformed to amorphous after heat treatment at 250 ℃ for 1 h. When the heat treatment temperature was higher than 280 ℃, the amorphous transformed to indium tin oxide with cubic crystal structure. After heat treatment at 600 ℃ for 1 h, the particle size is 8～20 nm, the mass ratio of In/Sn is near 9∶1, the granules have spherical shape and the dispersity is good.
Key words: indium tin oxide nanophase powder microstructure
