(福州大學材料研究所，福州 350002)
摘 要: 以TiCl3為源物質， 制備了納米級TiO2粉末材料。 通過差熱分析(DTA)，X射線衍射(XRD)和透射電鏡(TEM)等實驗手段研究了不同溫度下燒結的TiO2的形態和結構。結果表明， 采用這一工藝在300 ℃燒結就可獲得納米金紅石型TiO2，在800℃燒結其尺寸達100 nm左右； 形貌分析表明， 制備的金紅石晶粒常見形態為單形。
關鍵字: TiO2 納米材料 TiCl3 金紅石
（Institute for Materials Research of Fuzhou University, Fuzhou 350002, P. R. China）
Abstract:Nanoscale TiO2 powder materials were prepared using TiCl3 as a source matter. DTA, XRD and TEM were adopted to study the morphologies and structures of TiO2 sintered at various temperatures. The nanoscale rutile-type TiO2 could be easily obtained by sintered at 300 ℃, the crystal diameters reached about 100 nm when sintered at 800 ℃. The morphogy study showed that the rutile crystals prepared were simplex.
Key words: TiO2 nanomaterials TiCl3 rutile
