(東北大學自動化研究中心， 沈陽 110006)
摘 要: 以模型降階和內模控制為基礎設計了內回路滑動水口液壓系統PID控制器， 采用模糊預測控制策略設計了外回路結晶器液位系統的串級控制器， 同時對中間包重量進行了前饋補償。 該方法消除了內回路的微分沖擊現象和外回路的積分累積效應， 并克服了拉速等有色噪聲擾動。 實驗證明該控制方法較為理想， 有很高的實用價值。
關鍵字: 串級控制 模型降階 內模控制 微分沖擊 積分累積
CONCASTING PROCESS
（Research Center of Automation,Northeastern University, Shenyang 110006, P. R. China
）
Abstract:A PID controller is designed with model reduction and internal model control method for the inner loop of mould level cascade control system. A fuzzy predictive controller is used in the outer loop and the tundish weight is compensated by feed forward control. Either the inner loop derivative kick and the outer loop integral windup or the influence of colored noise caused by casting speed is deleted. The effectiveness of this cascade control method is demonstrated in simulations and on-line tests.
Key words: cascade control model reduction internal model control derivative kick integral windup
