(北京航空材料研究院 焊接研究室，北京100095)
摘 要: 經過急冷處理的Cu-(5～25)Ni-(16～28)Ti-B釬料的組織比未經急冷處理的釬料更加均勻，有利于提高Si3N4/Si3N4接頭的強度。當選用的釬料層厚度為40 μm和80 μm時，接頭的三點彎曲強度值分別達到402 MPa和380MPa。分析了接頭中元素Cu，Ni，Ti的面分布。釬料層厚度大小影響接頭的強度，對其原因進行了探討。
關鍵字: Si3N4/Si3N4釬焊；接頭強度；急冷釬料
（Welding Division, Beijing Institute of Aeronautical Materials, Beijing 100095, P .R.China）
Abstract:The rapidly-solidification treatment makes the microstructure of the Cu-(5～25)Ni-(16～28)Ti-B brazing filler metal more homogeneous. When using the brazing foils with suitable thicknesses of 40μm and 80μm, the three-point bend strength of the joints shows the high value of 402MPa and 380MPa respectively. The element area distribution of Cu, Ni and Ti of the joint was examined. The joint strength varies with the thickness change of the brazing foils, and the causes were studied.
Key words: Si3N4/Si3N4; joint strength; rapidly-solidified brazing filler foil
