(東北大學材料與冶金學院, 沈陽 110006)
摘 要: 采用室溫軋制復合法實驗研究了鋅/鋁軋制復合時變形率和剝離強度的關系，通過界面電鏡觀測， 探討了鋅/鋁軋制的復合機理，同時提出了鋅/鋁復合板的熱處理應選擇低溫、短時退火制度，以200℃，20 min為宜 。
關鍵字: 軋制復合 臨界變形率 剝離強度
（School of Materials and Metallurgy,Northeastern University, Shenyang 110006, P. R. China）
Abstract:Characteristic bonding of Al/Zn sheets by cold rolling was studied. With the given data and SEM photographs, the following conclusions were obtained: During the process of rolling, virgin aluminum extrudes through cracks, and bonds are formed with oxidized and contaminated surfaces of Zn; to obtain good bonding strength, heat treatment of Zn/Al clad materials should be at a low temperature for a short time, especially at 200℃for 20min.
Key words: clad rolling critical deformation bonding strength
