(中南工業大學粉末冶金研究所，材料系，長沙 410083)
摘 要: 研究了添加微量鈧對具有全層片組織和雙態組織的TiAl基合金在900℃的高溫力學性能的影響。結果表明，微量Sc可以顯著提高TiAl基合金的高溫屈服強度及抗壓強度。使用金相顯微鏡和透射電子顯微鏡詳細地分析了試樣高溫壓縮變形前后的顯微組織及其變化，在此基礎上探討了合金高溫下的塑性變形行為及其微 合金化強化機理。
關鍵字: TiAl基合金 微量鈧 顯微組織 高溫強度
（Central South University of Technology, Changsha 410083, P. R. China）
Abstract:Effect of minor Sc addition on the microstructure and high temperature mechanical properties of Ti-43Al and Ti-48Al alloys was investigated. It was shown that addition of 0.4%Sc may remarkably increase the high temperature strength of the alloys at 900℃. The microstructure of the samples both before and after compression test at 900℃ were analyzed with OM and TEM in details. Plastic deformation behaviour and strengthening mechainsm of the studied alloys at high temperature were discussed.
Key words: Ti-Al intermetallics minor Sc addition microstructure high temperature strength
