(1 西安交通大學材料科學與工程學院， 西安 710049)
2 洛陽工學院材料系，洛陽 471039)
摘 要: 對快速凝固Cu-0.6Cr-0.15Zr-0.05Mg合金伴隨時效析出的再結晶過程進行了觀察和研究。發現該合金在形變后的時效過程中，析出相非常細小、彌散，阻礙了再結晶的進行，出現了原位再結晶與不連續再結晶同時發生的現象。在再結晶的形核和長大過程中，析出相在晶界前沿快速粗化或重新溶解，并在再結晶區域中重新析出，導致更加彌散的析出相分布。
關鍵字: 快速凝固 Cu-Cr-Zr-Mg合金 時效析出 再結晶
（School of Materials Science and Engineering,Xi'an Jiaotong University, Xi'an 710049, P. R. China
Department of Materials, Luoyang Institute of Technology, Luoyang 471039, P. R. China）
Abstract:The recrystallization process during aging for a rapidly so lidified Cu-Cr-Zr-Mg alloy was investigated. It was found that the discontinuous recrystallization process has been partially retarded by the ultra-fine and dispersed precipitation during aging after deformation. Thus, a phenominon of simultaneous in situ and discontinuous recrystallizations has been observed in the rapidly solidified Cu-Cr-Zr-Mg alloy. On the formation and growth forecrysta llization, the precipitated phases are coarsened and dissolved in the front of g rain boundaries following a re-precipitation in the recrystallization area, whi ch results in the much more dispersed precipitation of the phases.
Key words: rapid solidification Cu-Cr-Zr-Mg alloy aging precipitation recrystallization
