(上海交通大學金屬基復合材料國家重點實驗室， 上海 200030)
摘 要: 用擠壓鑄造、擠壓比僅為10∶1的擠壓以及進一步的軋制成功地制備了具有高應變速率超塑性行為的β-SiC晶須增強LY12復合材料。該復合材料晶粒細小，約為2μm；在溫度為803K和初始應變速率為1.1×10-1s-1時，延伸率達350％，應變速率敏感系數 m 值約為0.35；超塑性變形的主要機制是細小晶粒的晶界滑動，適當?shù)奈⒘恳合嘤欣谠搹?fù)合材料的高應變速率超塑性。
關鍵字: 高應變速率超塑性 鋁基復合材料 擠壓鑄造
（State Key Laboratory of Metal Matrix Composites, Shanghai JiaoTong University,Shanghai 200030, P. R. China）
Abstract:A β-SiC whisker reinforced LY12 aluminum composite expected to exhibit high strain rate superplasticity has been successfully fabricated by squeeze casting and rolling after extrusion with a low extrusion ratio of 10∶1. The as-processed composite has a fine grain size of about 2μm, and exhibits a maximum total elongation of 350% and a strain rate sensitivity of about 0.35 at the initial strain rate of 1.1×10-1s-1 at 803 K. The dominant process of superplastic deformation is fine grain boundary sliding, and an appropriately small amount of liquid phase can enhance the high strain rate superplasticity of the composite.
Key words: high strain rate superplasticity aluminum matrix composites squeeze casting
