(哈爾濱工業大學材料科學與工程學院， 哈爾濱 150001)
摘 要: 利用跟蹤沉積坯表面坐標變化的計算機模型，預測不同條件下噴射成形產品的幾何形狀，結果表明：(1) 垂直噴射時不能形成形狀規則的柱狀沉積坯；(2) 斜噴且沉積器以一定的速度垂直下移，可以形成形狀很好的沉積坯，沉積坯的直徑主要與下移速度有關，同時也受噴射角度和霧化錐的散射角度影響。
關鍵字: 噴射成形 數值模型 坐標跟蹤 快速凝固
（School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China）
Abstract:A mathematical model tracing the moving position of the surface of spray formed billiets/discs was utilized to predict the geometry of the preform under various processing conditions. The conclusions can be drawn as: (1) no regular cylindrical preforms can be produced under the condition of spraying perpendicularly to the substrate surface; (2) as the atomized droplets spray inclinely and the substrate translates perpendicularly, preforms with excellent formation can be spray formed. The preform diameter mainly depends on the translating velocity, and the spray incline angle and the spatial angle of the spray cone as well.
Key words: spray forming numerical modeling rapid solidification
