(哈爾濱工業大學材料科學與工程學院， 哈爾濱 150001)
摘 要: 在建立筒形件強旋有限元力學模型過程中， 旋輪與工件接觸區及其邊界的描述是重要的一環。 在前人研究成果的基礎上， 正確地解決了這一問題， 提出了更加接近實際情況的模型， 并用該模型對強旋工藝過程進行 了剛塑性有限元分析， 揭示了工件表面的應力應變分布規律。
關鍵字: 強旋 有限元模型 模擬分析
CYLINDRICAL WORKPIECE POWER SPINNING
（School of Materials Science and Engineering,Harbin Institute of Technology, Harbin 150001, P. R. China
）
Abstract:The contact zone between roller and workpiece and its contour's definition are the cruxes of establishing the FEM mechanical model. On the basis of the study results of predecessors, this problem was solved rightly and a FEM simulation model of cylindrical workpiece power spinning, which conforms to the nature of the technology, was proposed and used to simulate the technology process, and the stress and strain distributions on the surface of workpiece were revealed.
Key words: power spinning finite element method model simulation analysis
