(哈爾濱工業大學復合材料研究所， 哈爾濱 150001)
摘 要: 利用自蔓延高溫燃燒合成結合準熱等靜壓技術(SHS/PHIP)成功地制備了高致密度的TiC-24Ni-6Mo金屬陶瓷(TN30)。 金屬陶瓷主要由球形TiC顆粒和近乎網狀的Ni粘結相組成。 TiC顆粒與粘結相界面結合良好， 部分粘結相中殘留有微量的游離碳。 TN30的抗彎強度和抗壓強度分別達到910MPa和3.04GPa。
關鍵字: 自蔓延高溫燃燒合成 金屬陶瓷 TiC顆粒 Ni粘結相
（Insitute for Composites Materials, Harbin Institute of Technology,ª¤ Harbin 150001, P. R. China
）
Abstract:Densified TiC-24Ni-6Mo cermet was prepared by self-propagating high temperature synthesis and pseudo-hot isostatic pressing(SHS£¯PHIP). The cermet mainly consists of spheroidal TiC particles and quasi-continuous Ni-binder phase. Interfacial bonding between TiC and Ni is found to be of a good quality. Residual C exists in Niª²binder phase. Transverse rupture strength and compressive strength are approximately 910MPa and 3.04GPa, respectively.
Key words: SHS/PHIP cermet TiC particles Ni-binder phase
