文章編號：1004-0609(1999)s1-0095-04
噴射成形的霧化氣流速度
李 周 張智慧 張國慶 米國發(fā) 劉仲武 田世藩 顏鳴皋
(北京航空材料研究院，北京 100095)
摘 要: 熔融金屬的氣體霧化是噴射成形過程的重要組成部分。作者從理論與實驗兩方面，對霧化氣體流場速度和霧化熔滴與氣體流場的交互作用進行了研究，建立了霧化氣體流速的關系式，探討了霧化熔滴對霧化氣體流場的影響。
關鍵字: 噴射成形 氣體霧化 氣流流速 兩相流
VELOCITY OF ATOMIZATION GAS DURING SPRAY FORMING
Li Zhou, Zhang Zhihui, Zhang Guoqing, Mi Guofa, Liu Zhongwu, Tian Shifan and Yan Minggao
（Beijing Institute of Aeronautical Materials, Beijing 100095, P. R. China）
Abstract:Gas atomization of melt metal is an important stage of spray forming process. Through the study of atomization gas velocity, expressions for dimensionless velocity in cross section of atomization gas stream and axial velocity of atomization gas have been established. The influence of droplets on gas velocity was also studied in this paper.
Key words: spray forming; spray atomization and deposition; gas velocity; two phase flow
