(北京航空航天大學 激光材料加工與表面工程實驗室， 北京 100083)
摘 要: 以NiCrWC混合粉末為原料，對TiAl合金進行激光表面合金化處理，制得了以γNiCrAlTi鎳基固溶體為基體，以TiC，W2C及M23C6 為增強相的耐磨復合材料表面改性層。分析了改性層的組織，并測試了其在滑動摩擦試驗條件下的耐磨性。實驗結果表明，激光表面合金化涂層具有較高的硬度及較好的耐磨性。
關鍵字: TiAl合金； 激光表面合金化；顯微組織； 耐磨性
（Laboratory of Laser Materials Processing and Surface Engineering，Beijing University of Aeronautics and Astronautics， Beijing 100083， P.R.China）
Abstract:γNiCrAlTi/TiCW2CM23C6 composite coatings were fabricatedon γTiAl intermetallic alloy by laser surface alloying withNiCrWC alloy powder precoatings. Microstructures of the composite coatings were investigated by OM, SEM, XRD and EDS and the wear resistance of the laser treated samples were evaluated under full dry sliding friction condition. The results show that the lasersurface alloyed composite coatings have high hardness and good wear resistance.
Key words: TiAl alloy； laser surface alloying； microstructure； wear resistance
