(西北工業大學 凝固技術國家重點實驗室， 西安 710072)
摘 要: 從熱力學角度分析了三元合金凝固過程中的溶質分凝行為， 利用耦合熱力學計算技術研究了Al-Si-Mg三元合金溶質分凝因數在凝固過程中的變化規律， 獲得了其與固相體積分?jǐn)?shù)的定量關系， 進而預測了不同條件下Al-Si-Mg三元合金的凝固過程和相析出規律。 實驗發現三元合金中溶質分凝因數在凝固過程變化巨大， 采用二元系中的參數使得對共晶種類和共晶分?jǐn)?shù)的預測均與實驗值有較大偏差。 采用耦合熱力學計算技術， 獲得了分凝因數在凝固過程中的變化規律， 使預測值更好地吻合于實驗結果。
關鍵字: 溶質分凝；三元合金； 熱力學計算； 共晶分?jǐn)?shù)
（State Key Laboratory of Solidification Processing,
Northwestern Polytechnical University, Xi′an 710072, China）
Abstract:Variation of solute partition coefficient was studied in dendritic solidification process of Al-Si-Mg alloys. The calculations were coupled with CALPHAD technology. It is found that the partition coefficient changes greatly during solidification process, which is very important to the microsegregation and the precipitation of various phases. The solidification path and eutectic fractions were obtained by employing the binary partition coefficient and CALPHAD technology separately. The results show that great errors exist under assuming the partition coefficient as a const due to the interaction between solutes. Coupled CALPHAD technology with microscale solidification model used in this paper, the predicted solidification processes of Al-Si-Mg alloys agree well with the experimental results.
Key words: solute partition; multicomponent alloy; CALPHAD; eutectic fraction
