(1. 東北大學 材料與冶金學院， 沈陽 110004；
2. 中國科學院 金屬研究所， 沈陽 110016;
3. 遼寧工學院 材料與化學學院， 錦州 121001)
摘 要: 利用納米壓痕儀、 掃描電鏡等研究了Zr基大塊非晶合金在納米壓痕條件下的變形及力學性能。 Zr基大塊非晶合金在納米壓頭作用下以彈性-塑性方式變形， 載荷—位移曲線及壓痕周邊多重剪切帶（堆起或波紋狀）的特征證明了塑性變形的存在。 冷卻速度、 第二相及退火等因素影響非晶合金的壓痕硬度HV和彈性模量E， 冷卻速度小的試樣或部位（如試樣中心）的HV， E值略高； 離第二相（W絲）越近， HV， E值越高； 退火處理提高非晶的HV， E值， 同時退火與第二相還明顯改變壓痕周邊的變形狀態及塑性變形量的大小， 退火顯著減小塑性變形量， 使壓痕周邊凹陷， 而第二相使壓痕堆起消失。對塑性變形機理進行了初步分析。
關鍵字: Zr基大塊非晶合金； 納米壓痕； 變形； 力學性能
YANG Hong-cai1, HU Zhuang-qi2
（1. College of Materials and Metallurgy,
Northeastern University, Shenyang 110004, China;
2. Shenyang National Laboratory for Materials Science,
Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016, China;
3. College of Materials and Chemistry,
Liaoning Institute of Technology, Jinzhou 121001, China）
Abstract:Deformation and mechanical properties of Zr-based bulk metallic glasses (BMGs) under nanoindenter and their affecting factors were studied by means of nanoindentation instrument and scanning electron microscope (SEM). The results indicate that Zr-based BMGs deform in an elastic-plastic mode under a nanoindenter. Load—displacement curve, multiple shear bands and ripple shape around a nanoindenter confirm the existence of a amount of plastic deformation. For pure quenched Zr-based BMGs, the larger the size of samples or the nearer the location away from the surface of a same sample, the smaller the values of microhardness and elastic modulus; annealing and tungsten fiber addition both enhance the values of HV and E, and significantly change the morphology around a nanoindenter and the amount of plastic deformation. The mechanism of plastic deformation is preliminarily analyzed.
Key words: Zr-based bulk metallic glass; nanoindention; deformation; mechanical property
