(中南大學 化學化工學院， 長沙 410083)
摘 要: 用TG分析法研究了未活化與機械活化閃鋅礦在氧氣氛下的氧化行為， 結果表明，在400～873K之間， 機械活化閃鋅礦的剩余質量隨著球磨時間的增加而增加，未活化閃鋅礦則表現為熱質量損失。 用粒度分析、 X射線衍射分析和重量分析法分別對機械活化閃鋅礦的結構進行了表征。 發現隨著球磨時間的增加，機械活化閃鋅礦球磨一定時間后， 其比表面積基本保持不變， 而晶格畸變率增大， 晶塊尺寸降低， 且機械活化閃鋅礦中的單質硫磺含量極低， 可忽略不計。 機械活化和未活化閃鋅礦在TG曲線上的表現主要與晶格畸變率增大和晶塊尺寸降低有關。
關鍵字: TG分析法； 氧化行為； 閃鋅礦； 機械活化； 晶格畸變
YE Lu-sheng， GUO Guan-hua
（College of Chemistry and Chemical Engineering，
Central South University， Changsha 410083， China）
Abstract:The oxidation behaviors of unactivated and mechanically activated sphalerite were investigated using thermogravimetry (TG) in oxygen. It is found that the remaining mass at 400～873K in TG curves rises with increasing the grinding time. The surface structures were characterized by laser particle size analysis， X-ray powder diffraction analysis (XRD) and gravimetric method， respectively. The specific surface area of mechanically activated sphalerites remains almost constant after a certain grinding period， and the content of elemental sulphur of mechanically activated sphalerite is determined as 5×10-4，and the lattice distortion increases， but the crystallite size decreases with increasing the grinding time. All the results imply that the mass increase at 400～850K in the TG curve of mechanically activated sphalerite depends mainly on the increase of lattice distortion and the decrease of crystallite size with increasing grinding time.
Key words: thermogravimetry； oxidation behavior； sphalerite； mechanical activation； lattice distortion
