準理論模型的應用
(中南大學 化學化工學院， 長沙 410083)
摘 要: 應用鋁酸鈉溶液種分首槽溫度控制預報準理論模型， 結合實際生產情況， 在原模型參數的基礎上將晶種表面積改設為變量， 并考慮到反饋比這一重要工藝參數的作用，引入小于45μm粒子質量分數和二次成核生成的臨界粒徑的晶核粒徑分布值之間的關系，應用線性回歸原理， 求出修正后的模型參數， 根據現場生產數據， 對首槽控制溫度進行預測， 其結果與穩定生產的首槽控制溫度及經驗?zāi)Ｐ停╔模型）的預測結果基本一致。 以C++Builder為開發平臺， 成功開發了基于該原理的、運行于Windows系統的應用軟件， 使用效果良好。
關鍵字: 砂狀氧化鋁； 溫度控制； 準理論模型
YIN Zhou-lan, CHEN Jin-qing
（College of Chemistry and Chemical Engineering,
Central South University, Changsha 410083, China）
Abstract: According to the practice of sandy alumina production, the surface area of seed is a variable, which is considered to be a constant in the original sub-theory model for the prediction of the first trough temperature. Due to the importance of the Al(OH)3 seed and feedback ratio, a quantitative relation between mass fraction of Al(OH)3 seed whose diameter is less than 45μm, and the distribution frequency is introduced. The model parameters can be obtained by using statistics regression. A software developed with C++ Builder about on-time calculation of the model parameters and the prediction of the first-trough temperature is proved to be reliably available in practice.
Key words: sandy alumina; temperature control; sub-theory model
