(1. 西安理工大學 材料科學與工程學院, 西安 710048；
2. 西安交通大學 材料科學與工程學院, 西安 710049)
摘 要: 利用非均勻成核法， 以pH緩沖溶液作沉淀劑， 研究了Al2O3包覆TiH2粉末的包裹技術。結果表明， Al3+濃度對包覆層顯微結構有影響， 當Al3+濃度為0.05mol/L, pH值為4.5時， 可以獲得好的氧化鋁前驅體包覆TiH2顆粒， 經350℃煅燒可得到均勻、 致密的Al2O3/TiH2包覆顆粒。 當包覆層厚大于1.42μm時， Al2O3/TiH2包覆顆粒釋放氫氣過程被顯著地延遲，這種延遲效應對泡沫鋁制備具有重要的實用價值。 采用Al2O3/TiH2包覆粉體作為發泡劑，成功制備出多孔泡沫鋁材料。
關鍵字: 非均勻成核法； Al2O3/TiH2包裹粉；釋氫性能；泡沫鋁
（1. School of Materials Science and Engineering, Xi′an University of Technology,Xi′an 710048, China;
2. School of Materials Science and Engineering, Xi′an Jiaotong University,
Xi′an 710049, China）
Abstract:TiH2 particles coated with Al2O3 by heterogeneous nucleation method with buffered pH solution as precipitation reagent were studied. The homogeneous and compact Al2O3-coated TiH2 particles can be obtained at c(Al3+)=0.05mol/L and pH=4.5, and then by calcining at 350℃. The releasing hydrogen temperature of Al2O3/TiH2 particle is notably delayed when the thickness of coating layer surpasses 1.42μm, and the delaying effect can be used in the production of Al foams. The high-quality Al foams were prepared successfully using Al2O3-coated TiH2 powders as the foaming reagent.
Key words: heterogeneous nucleation method; Al2O3-coated TiH2 particle; releasing hydrogen characteristic; Al foams
