起始形核溫度的計算
(1. 中國科學院力學研究所 非線性國家重點實驗室，北京 100080；
2. 鄭州大學 材料研究中心， 鄭州 450002)
摘 要: 基于快速凝固的瞬態形核理論和對連續冷卻條件下整個溫度區間的瞬態形核數和晶核體積積分，導出了連續冷卻多階段快速凝固條件下過冷熔體中各析出相起始形核溫度的計算方法。 假定界面?zhèn)鳠崽幱谂ｎD冷卻方式， 對Ni-Al合金平面流鑄條帶形成過程中析出的化合物相起始形核溫度做了計算。
關鍵字: 快速凝固; 瞬態形核; 起始形核溫度
during rapid solidification by continuous cooling of multi-step reaction
（1. State Key Laboratory for Nonlinear Mechanics of
Continuous Media, Institute of Mechanics,
Chinese Academy of Sciences, Beijing 100080, China;
2. Research Center of Materials, Zhengzhou University, Zhengzhou 450002, China）
Abstract:The calculation method of the initial nucleation temperature was deduced for the condition of continuous cooling by multi-step solidification, based on transient nucleation theory for the integration of the total nucleation number and volume in the whole temperature range. Assuming that the interface heat transfer was in Newton model, the initial nucleation temperature of intermetallic phase was calculated on Ni-Al alloy during ribbons formation by planar flow casting.
Key words: rapid solidification; transient nucleation; initial nucleation temperature
