(上海交通大學 材料科學與工程學院， 上海 200030)
摘 要: 用電磁分離工藝成功制備了初生Si相體積分數、材料顯微硬度和耐磨性沿徑向呈梯度分布的棒狀復合材料，討論了梯度層的形成過程。微觀組織觀察和力學性能測試結果表明：在近外壁區域形成了體積分數高達16％的細小初生Si相偏聚區，此區硬度高，耐磨性好，中心區為細小和均勻的共晶組織，兩部分之間為顆粒體積分數漸變的過渡區，可使耐磨層與基體的結合強度得到保證。
關鍵字: 電磁分離；過共晶鋁硅合金；初生Si相；自生梯度復合材料
in-situ hypereutectic Al-Si
functional graded materials
SUN Bao-de，ZHOU Yao-he
（School of Materials Science and Engineering,
Shanghai Jiaotong University, Shanghai 200030, China）
Abstract:Hypereutectic Al-Si functional graded materials(FGMs) were produced by electromagnetic separating process. It is found that Si primary particles are formed at the outer zone of the cylinder like samples with graded distribution and its volume fraction reaches 16%. Results show that the hardness and wear resistance also exhibit graded distribution along the radial direction.
Key words: electromagnetic separating; hypereutectic Al-Si alloy; primary Si phase; in-situ FGMs
