(上海交通大學 金屬基復合材料國家重點實驗室，上海 200030)
摘 要: 利用鈦與石墨之間的自蔓燃高溫合成反應經普通的鈦合金鑄造工藝制備了TiC增強的鈦基復合材料。借助X射線衍射儀、光學金相顯微鏡和透射電鏡分析了鈦基復合材料的物相組成和增強體的微觀結構。結果表明：復合材料由TiC增強體和基體鈦合金組成。TiC顯示 兩種不同的形態：樹枝晶狀和等軸或近似等軸狀。原位合成的增強體TiC以溶解-析出的方式生長。從二元相圖分析，凝固過程經歷三個階段： 初晶TiC，二元共晶β-Ti+TiC和固態相變。由于成分過冷的形成，初晶TiC以樹枝晶的形態生長。二元共晶TiC以等軸或近似等軸狀生長。少量的TiC在形核與長大的過程中形成孿晶結構，孿晶面是(111)面。
關鍵字: 鑄造；鈦基復合材料；微觀結構；TiC
TiC in in situ synthesized titanium
matrix composites
ZHANG Xiao-nong, WU Ren-jie
（State Key Laboratory of Metal Matrix Composites,
Shanghai Jiaotong University, Shanghai 200030, China）
Abstract:TiC reinforced titanium matrix composites were produced by non-consumable arc-melting technology utilizing the selfpropagation high-temperature synthesis (SHS) reaction between titanium and graphite. X-ray diffraction (XRD) was used to identify the phases in the composites. Microstructures of the composite s were observed with optical microscope (OM) and transmission electron microscope (TEM). The results show that there are two phases in the composites: TiC and titanium matrix alloy. TiC shows two different shapes: dendritic shape, equiaxed or near-equiaxed shape. The in situ synthesized TiC grows in a way of dissolution-precipitation. Analysis of binary phase diagram determined that the solidification path undertook the following three stages: primary TiC, binary eutectic β-Ti+TiC and solid transformation. Primary TiC grows in dendritic shape due to the formation of composition undercooling. Binary eutectic TiC grows in equiaxed or near-equiaxed shape. A small quantity of TiC may form twin structure during nucleation and growth. The twin plane is (111) plane.
Key words: casting; titanium matrix composites; microstructure; TiC
