(1.福州大學 機械工程系， 福州 350002；
2.福州大學 材料科學與工程學院， 福州 350002)
摘 要: 探討了鋁熔體高效凈化、富鐵雜質相變質和晶粒細化處理技術的效果及其相互關系。提出凈化是鋁熔體處理的關鍵，是細化和變質的基礎；據此研究了高效鋁熔體綜合處理技術，其效果顯著。對壓力罐用鋁材的除雜率和針孔降低率分別達82.0%和87.0%，鑄態晶粒平均尺寸減小了18.6倍，雜質相也由較粗大長針(片)狀變成彌散細小的圓球狀或短棒狀，從而使材料的力學性能，尤其是塑性得到了較大幅度的提高。
關鍵字: 鋁熔體; 凈化; 變質; 晶粒細化; 熔體綜合處理
melt-treatment of aluminum and its effect
（1.Department of Mechanical Engineering，
Fuzhou University，F(xiàn)uzhou 350002，China;
2.College of Materials Science and Engineering，
Fuzhou University， Fuzhou 350002，China）
Abstract:The effect of melt-treatment techniques such as high-efficient purification，modification of Fe-rich impurity-phase and grain refinement and some interrelations among these treating techniques of molten aluminum were investigated. It is firstly put forward that the purification is the fundament al and the key process，that is, the basis of modification and grain refinement processes. Based upon this viewpoint，a new synthetical technique of high-efficient melt-treatment of aluminum has been developed. The new technique makes the metallurgical quality of aluminum sheet used for pressure can be improved remarkably，that is，the rate of removing inclusions and the extent of lowering porosity amount to about 82.0% and 87.0% respectively，and as-cast mean grain diameter is about a fraction of 18.6 times as big as that of no melt-treatment material，an d the coarse and long needle/flake Fe-rich impurity phases are transformed into complex compounds of tiny， sphere/short stick form. For this reason，the mechanical properties, especially the plasticity of this material have been improved remarkably.
Key words: molten aluminum; purification; modification; grain refinement; synthetical melt-treatment
