張孝彬2，盧煥明2，劉茂森1
(1.浙江大學 材料科學與工程系, 杭州 310027;
2.浙江大學 硅材料國家重點實驗室, 杭州 310027)
摘 要: 利用原位反應技術，通過控制反應物B2O3和石墨的含量制備了原位生長納米TiB2增強Cu基復合材料。用XRD，EDS，TEM對TiB2/Cu原位復合材料進行微結構分析，研究表明銅基體中彌散分布著50nm的TiB2顆粒，并對Cu基體有良好的增強作用。
關鍵字: 原位反應；納米TiB2；Cu基復合材料
nanoscale TiB2/Cu in-situ
composites
Qi Wei-xiao1, LIU Fu2, ZHANG Xiao-bin2,
LU Huan-ming2,LIU Mao-sen1
（1.Department of Materials Science and Engineering,
Zhejiang University, Hangzhou 310027, China;
2.Key Laboratory of Silicon Materials,
Zhejiang University,Hangzhou 310027,China）
Abstract:The TiB2 nanoparticles reinforced copper matrix composites were prepared by in-situ reaction which was controlled the content of reactant B2O3 and graphite. Microstructures of the in-situ TiB2/Cu nanoparticle composites were analyzed using XRD, EDS and TEM. The result shows that the in-situ synthesized TiB2 particles with a size of 50nm disperse in copper matrix and have asignificant reinforcement for the copper matrix.
Key words: in-situ reaction;TiB2 nanoparticle; Cu matrix composites
