(1. 華中科技大學 材料科學與工程學院， 武漢 430074；
2. 上海交通大學 金屬基復合材料國家重點實驗室， 上海 200030)
摘 要: 通過透射電鏡對碳化硅晶須增強鋅基復合材料微結構的觀察，發現碳化硅晶須與基體間界面結合良好，界面附近區域分別存在T(T′)相和二次析出η相，且后者與碳化硅晶須間存在一定取向關系。此外，擠壓變形后碳化硅晶須中存在大量位錯、層錯和孿晶等缺陷，基體中η相也有孿晶產生。
關鍵字: 碳化硅晶須； 鋅基復合材料； 微結構
SiC whisker reinforced zinc alloy matrix
（1. School of Materials Science and Engineering，
Huazhong University of Science and Technology， Wuhan 430074， P.R.China;
2. State Key Laboratory of Metal Matrix Composites，
Shanghai Jiaotong University， Shanghai 200030， P.R.China）
Abstract: The microstructure of SiCw reinforced zinc alloy matrix have been observed by means of transmission electron microscope. It was found that the interfacial bonding between the SiCw and the matrix is good. There exist T(T′) phase and secondary precipitated η phase near the interface， and an orientation relationship between the SiCw and the secondary precipitated η phase is found out. Besides， large amounts of dislocations， stacking faults and twins were observed in the SiCw reinforcement after extruding the specimen. Twins were also observed inside η phase in the matrix.
Key words: SiC whisker； zinc alloy matrix composite； microstructure
