(哈爾濱工業大學 材料科學與工程學院，哈爾濱 150001)
摘 要: 采用真空熱壓燒結法制備了致密度為98.5%的20Wf/30ZrCp/W復合材料，分析測試了復合材料的相組成、微觀組織結構和力學性能。結果表明：W絲在復合材料中分布較均勻，且基本平行于熱壓面；W與ZrC在界面處發生互擴散，形成了(Zr,W)C固溶體；W絲與基體間的界面結合強度過高，并發生明顯的再結晶現象；加入W絲未能起到強韌化作用。復合材料的抗彎強度和斷裂韌性分別為504 MPa和9.48 MPa·m1/2。
關鍵字: 鎢基復合材料； 鎢絲； 組織結構； 力學性能
20Wf/30ZrCp/W composite
（School of Materials Science and Engineering,
Harbin Institute of Technology, Harbin 150001, P.R.China）
Abstract:The composition, microstructure and mechanical properties of 20Wf/30ZrCp/W composite produced using hot pressing technique were investigated. Results show that the relative density reaches 98.5%. The tungsten wires are well distributed within the ZrCp/W matrix with preferred orientation. There is an interdiffusion of Zr and W in ZrCp/W interface, which results in (Zr, W)C solid solution forming and a strong bond between ZrC particle and tungsten wire or tungsten. The tungsten wires are recrystallized and have no strengthening and toughening effects on ZrCp/W matrix. The strength and fracture toughness of 20Wf/30ZrCp/W composite are 504 Pa and 9.48 MPa·m1/2, respectively.
Key words: tungsten matrix composite; tungsten wire; microstructure; mechanical properties
