(中南大學 粉末冶金國家重點實驗室，長沙 410083)
摘 要: 對粉末注射成形粘結劑組分的熱力學參數進行了計算，并通過實驗觀察得到了組分相容性的判據。分別以PVB，EVA，PMMA為高分子組分，討論了它們與低分子量組分PEG的相容性，并通過混煉機混煉和偏光顯微鏡觀察，得到了ΔG/T＜1.5可工藝相容、ΔG/T＞3.0工藝不相容的熱力學判據。
關鍵字: 粉末注射成形; 熱力學; 相容性; 粘結劑
for powder injection molding
（State Key Laboratory for Powder Metallurgy,
Central South University, Changsha 410083, P.R.China）
Abstract:Thermodynamic parameters of binder ingredients for powder injection molding were calculated. These ingredients of binder were mixed in order to get a means to determine theoretically the compatibility of ingredients. Polymers, such as PVB, EVA and PMMA were used respectively to mix with PEG. The micrograph of PEG-PMMA mixtures is also adopted to certify that when ΔG/T＜1.5, binder ingredients are compatible, while ΔG/T＞3.0, binder ingredients are incompatible.
Key words: powder injection molding； thermodynamics； compatibility； binder
