(中南大學 材料科學與工程系， 長沙 410083)
摘 要: 在Gleeble-1500熱模擬試驗機上，采用高溫等溫壓縮試驗，對7075鋁合金在高溫壓縮變形中的流變應力行為進行了研究。結果表明，應變速率和變形溫度的變化強烈地影響合金流變應力的大小，流變應力隨變形溫度升高而降低，隨應變速率提高而增大；可用Zener-Hollomon參數的指數形式來描述7075鋁合金高溫壓縮變形時的流變應力行為。
關鍵字: 7075鋁合金; 熱壓變形; 流變應力
hot compressiondeformation
（Department of Materials Science and Engineering,
Central South University,Changsha 410083, P.R.China）
Abstract:The flow stress behavior of 7075 aluminum alloy during hot compression deformation was studied by isothermal compression test at Gleeble-1500 thermal-mechanical simulator. The results show that the flow stress is controlled by both strain rate and deforming temperature, the flow stress decreases with the increase of deforming temperature, while increases with the increase of strain rate. The flow stress of 7075 alloy during high temperature deformation can be represented by a Zener-Hollomon parameter in exponential form.
Key words: 7075 aluminum alloy, hot compression deformation, flow stress
