(1. 北京科技大學 理化系， 北京 100083;
2.華東冶金學院 冶金系， 馬鞍山 243002)
摘 要: 分析了合成AlON的各種方法。用模式識別結合神經網絡對碳熱還原氮化合成AlON工藝進行了優化, 利用模式逆映射得到了理想的合成工藝參數。對AlON體系進行了熱力學初步分析,計算了溫度為2 073 K時合成AlON的熱力學參數狀態圖。根據熱力學參數狀態圖所確定的條件，熱壓合成了AlON陶瓷。對所合成的AlON試樣進行了X射線衍射標定及部分物理性能的測定。其密度為3.63 g/cm3，約為其理論密度的97.8%。
關鍵字: 氮氧化鋁； 合成； 模式識別
（1. Department of Physical Chemistry, University of Science and Technology Beijing,
Beijing 100083, P.R.China;
2. Department of Metallurgy, East China University of Metallurgy,
Maanshan 243002, P.R.China）
Abstract:The synthesis technology of AlON ceramics was investigated. The program of pattern recognition was used to optimize the parameters of AlON synthesis process, and the proper parameters were obtained by inverse projection. The thermodynamic properties of AlON were preliminary analyzed and estimated, phase stability diagrams at 2 073 K were calculated. AlON ceramics was synthesized by hot-press sintering under the conditions given by phase stabilitydiagram. The density of AlON is 3.63 g/cm3，about 97.8% of its theoretic density.
Key words: aluminum oxynitride; synthesis; pattern recognition
