(西安理工大學 材料科學與工程學院，西安 710048)
摘 要: 研究了固液兩相區等溫處理對鑄態ZA27合金初生相形貌的影響。結果表明： 在固液兩相區進行等溫處理時，枝晶熔斷受固液界面處原子的擴散控制，提高等溫溫度、延長等溫時間因有利于Zn和Al原子的擴散而促進初生相由枝晶向顆粒狀晶演變；預變形促進初生相形貌演變的根本原因在于等溫處理時液相沿預變形產生的亞晶界的熔滲。
關鍵字: 固液兩相區； 等溫處理； 預變形
（School of Materials Science and Engineering, Xi′an University of Technology，
Xi′an 710048， P.R.China）
Abstract:The effects on transformation of primary phase morphology were studied by using isothermal heat treatment of the as-cast ZA27 ingots in semisolid state. The results show that remelting of dendrite is controlled by atom diffusion in the solid-liquid interface. Increasing isothermal temperature and prolonging isothermal time， which promoted the diffusion of Zn and Al atoms， are helpful to the transformation. Liquefaction along hypo-grain boundaries caused by pre-deforming is the radical reason for the morphological transformation.
Key words: semisolid state; pre-deformation; isothermal treatment
