析出相與基體位向關系的影響
(1. 江漢大學 機電工程學院，武漢 430019;
2. 湖北工學院 機械工程系，武漢 430068)
摘 要: 采用不同的淬火時效工藝研究了不同的Be含量對7475鋁合金的硬度以及析出相與基體位向關系的影響。實驗結果表明：加入0.023%Be能有效提高7475鋁合金的硬度，硬度值最高可達HB140，無鈹?shù)暮辖鹌溆捕戎底罡卟坏紿B120，含0.7%Be合金的硬度值處于上述兩者之間。同時添加鈹會加快7475鋁合金的時效硬化進程。電子衍射分析表明：含Be的合金中, η′相與基體的位向關系為(-1-120)η′∥(42-2)Al，β相與基體的位向關系為(200)β∥(2-42)Al；而不含Be的鋁合金中β相與基體的位向關系為(11-1)β∥(6-20)Al。
關鍵字: 鈹；7475鋁合金；時效
behavior and oriented relation between
precipitated phases and matrix of 7475
aluminum alloy
（1. School of Mechanical and Electric Engineering,
Jianghan University, Wuhan 430019, China;
2. Department of Mechanical Engineering, Hubei Polytechnic University,
Wuhan 430068, China）
Abstract:The effect of beryllium on the hardness of 7475 aluminum alloy and the orientation relation between precipitation phases and Al matrix was studied with the different aging treatment method. The results show that Be increases the alloy hardness and raises its aging hardening rate. The hardness of the alloy is HB140 with 0.023%Be, HB120 without Be and between their values with 0.7%Be. At the same time, the oriented relation of the alloy containing Be is diff er ent from that one without Be by with TEM, that is, (-1-120)η′∥(42-2)Al and (200)β∥(2-42)Al with Be, (11-1)β∥(6-20)Al without Be.
Key words: beryllium; 7475 aluminum alloy; aging
