(太原重型機械學院 材料科學與工程分院，太原 030024)
摘 要: 在實驗的基礎上，繪制出填料粒子成型時的體積與泡沫鋁合金的孔隙率相對應的變化曲線，并應用力學的基本原理對泡沫鋁合金孔結構的成形機理進行了研究。確定填料粒子成型時的體積變化應在0%～12%之間(此時泡沫鋁合金的孔隙率應在41.6%～47.6%之間)，才能穩定填料粒子尺寸，從而更好地控制泡沫鋁合金的孔徑尺寸，提高成型質量，穩定泡沫鋁合金的使用性能。
關鍵字: 填料粒子；泡沫鋁合金；孔結構；孔隙率；散粒介質
YOU Xiao-hong, CHAI Yue-sheng
（Branch of Materials Science and Engineering,
Taiyuan Heary Machinery Institute, Taiyuan 030024, China）
Abstract:The changing curve of the volume of shaped filler particles in relation to foam aluminum porosity was described on the basis of experiment. The shaping mechanism of foam aluminum pore structure was shown by the basic principle of mechanics. It was asserted that the volume changes (decreasing) of shaped filler particles should be 0%～12% (at this time, the porosity of foam aluminum should be 41.6 %～47.6%), thus, the size of the particle can be stabilized so as to better control the aperture of the foam aluminum and stabilize its operating performance.
Key words: filler particle; foam Al alloy; hole structure; porosity; scattering particle medium
