(福州大學 材料科學與工程學院，福州 350108)
摘 要: 采用可溶性Ni陽極電刷鍍方法制備納米晶Ni-Fe合金鍍層，利用XRD、SEM、TEM、顯微硬度計等測試方法分析低溫退火對鍍層結構和性能的影響。結果表明：納米晶Ni-Fe合金鍍層的硬度隨退火溫度的升高而提高，在200 ℃時達到最大值，存在明顯的退火再強化；繼續提高退火溫度導致鍍層硬度降低；400 ℃退火后的鍍層硬度與鍍態的接近；納米晶Ni-Fe合金鍍層退火過程沒有出現晶粒異常長大，表現出比純Ni鍍層更高的熱穩定性。
關鍵字: 電刷鍍；Ni-Fe合金鍍層；退火再強化；熱穩定性
（College of Materials Science and Engineering, Fuzhou University, Fuzhou 350002, China）
Abstract: Nanocrystalline Ni-Fe alloy coatings were synthesized by brush plating using soluble anode. Microhardness test and techniques of XRD, SEM and TEM were applied to characterize the microstructures and mechanical properties of Ni-Fe alloy coatings. The results show that the microhardness of Ni-Fe alloy coatings increases with increasing annealing temperature and reaches a peak value at 200 ℃, showing a significant hardening during annealing. With further increasing annealing temperature, the microhardness decreases gradually, but the microhardness of the coating after being annealed at 400 ℃ is still as high as that of the as-deposited sample. The abnormal grain growth is not observed during annealing of Ni-Fe alloy coatings, which indicates a better thermal stability.
Key words: brush plating; Ni-Fe alloy coating; annealing hardening; thermal stability
