(武漢科技大學材料冶金學院 高溫陶瓷與耐火材料省重點實驗室, 武漢 430081)
摘 要: 應用 PCVD技術，以金屬有機物TPT作鈦源在H13模具鋼表面沉積Ti(CN)涂層， 研究了不同工藝參數對涂層組織和性能的影響,并對涂層的抗氧化性進行了實驗。結果表明， 采用適當?shù)某练e溫度、 壓力及氮?dú)饬髁浚?可以在H13鋼表面得到以Ti(CN)為主的致密涂層， 在沉積溫度500℃時達到最高硬度HV1760, 涂層在600℃以下具有良好的抗氧化性。
關鍵字: PCVD; Ti(CN)涂層; 抗氧化性
LI Ping-sheng, ZHANG Xi-ju
（Department of Materials and Metallurgy,
Wuhan University of Science and Technology,
Wuhan 430081, China）
Abstract:Using organic-metallic compound TPT as the source of Ti , H13 mould steel was coated Ti(CN) layer by PCVD technique， the effects of coating technics on the structure and micro-hardness and the anti-oxidation property of Ti(CN) layer were investigated. The results show that under the appropriate temperature and pressure, one layer mostly of Ti(CN) is formed on the steel surface which has highest micro-hardness of HV1760 at 500℃,and the anti-oxidation property of the layer is significant below 600℃.
Key words: PCVD; Ti(CN) layer; anti-oxidation property
