(裝甲兵工程學院 裝備再制造技術國防科技重點實驗室， 北京 100072)
摘 要: 應用納米復合電刷鍍技術制備了納米氧化鋁/鎳復合鍍層， 采用透射電鏡、 XPS等現代分析技術和性能評價手段研究了納米顆粒對鎳刷鍍層組織和性能的影響。結果表明： 納米顆粒在復合刷鍍層中彌散分布、 粒度均勻， 與基質鎳金屬以化學鍵結合； 納米顆粒增加了基質金屬的成核率， 細化了鍍層組織， 顯著提高了刷鍍層的硬度和耐磨性。與鎳金屬刷鍍層相比， 復合刷鍍層硬度和耐磨性分別提高0.5倍和1.5倍以上。 復合刷鍍層的組織特征合理地解釋了納米顆粒對其性能影響的機理。
關鍵字: 納米顆粒； 刷鍍層； 組織； 性能
properties of electrobrush plated nickel coating
（National Laboratory for Remanufacturing,
Academy of Armored Forces Engineering,
Beijing 100072, China）
Abstract:Nanoparticle reinforced nickel matrix composite (n-Al2O3/Ni) coatings were fabricated by electrobrush plating technique. Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) techniques were employed to study the effects of the nano-particle on microstructure and properties of n-Al2O3/Ni composite coatings. It is revealed that the nano-particles disperse in the coatings evenly and take chemical bonds to the matrix (metal nickel). In fact, nano-particles enhance inhomogeneous nucleation of matrix during the composite formation by electrobrush plating, and refine the microstructure of the composite coatings. Nano-particles can obviously improve hardness and wear resistance of the electronbrush plated metal coatings. Compared with the nickel metal coatings, the hardness and wear resistance of n-Al2O3/Ni composite coatings increase by 0.5 times and 1.5 times, respectively. Microstructure characteristics properly elucidate the effect and mechanism of nano-particle improving properties of the electrobrush plated coatings.
Key words: nano-particles; electrobrush plated coatings; microstructure; properties
