(1. 沈陽工業大學 材料科學與工程學院，沈陽 110023；
2. Daimler-Chrysler Corporation，Stuttgart 70546；
3. 北京航空航天大學 材料科學與工程學院，北京 100083)
摘 要: 采用液態金屬滲流法制備直徑為6 mm 的Zr基塊體多孔非晶合金，采用掃描電鏡(SEM)和X射線衍射儀(XRD)分析多孔材料的結構、形貌、斷口特征和相組成，同時對多孔非晶合金的孔隙結構和力學特點進行分析。結果表明：采用CaC2作為孔隙支撐材料，能夠制備出孔隙分布均勻、孔隙直徑為0.2~0.8 mm的多孔非晶合金，其密度和孔隙率分別為3.57 g/cm3和47%。壓縮力學性能實驗表明：該多孔非晶合金的應力—應變曲線具有鋸齒狀變化規律，應力逐漸降低，其最大強度和應變分別為383 MPa和18.6%，應變量遠大于單相非晶合金的應變量。
關鍵字: 多孔非晶合金；滲流鑄造；力學性能
porous Zr-based bulk metallic glass
（1. School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110023, China;
2. Daimler-Chrysler Corporation, Stuttgart 70546, Germany;
3. School of Materials Science and Engineering, Beihang University, Beijing 100083, China）
Abstract: A porous Zr-based bulk metallic glass with a diameter of 6 mm was fabricated by melt infiltrating casting method. The porous cell morphology, structure, fracture surface and phase constituent of the porous material were investigated by scanning electron microscopy (SEM) and X-ray diffractometry (XRD), respectively. And the mechanical properties and cell structure were also discussed. The results show that a uniform distribution of porous cells with size of 0.2−0.8 mm forms by introducing CaC2 particles as space holders. The density and porosity of the porous bulk metallic glass are 3.57 g/cm3 and 47%, respectively. The largest yield strength of this porous material is 384 MPa and it gradually declines accompanied by serrated flow under compression. The final failure occurs at a strain of 18.6%, well in excess of monolithic amorphous alloys.
Key words: porous metallic glass; melt infiltrating casting; mechanical properties
