( 1. 中南大學 材料科學與工程學院， 長沙 410083;
2. 電氣通信大學 機械工程系, 東京 182-8585， 日本)
摘 要: 采用銅/鋼爆炸復合板浸鋁鑄造的方法制取了鋁/鋼鑄件。 用掃描電子顯微鏡對復合鑄件中鋁/鋼界面裂紋的形成以及這些裂紋在不同熱處理制度下和拉剪測試時的擴展形為進行了分析。研究表明， 浸鋁鑄造后的裂紋主要存在于波側面的Fe2Al5層中，且大部分平行于波形界面。 當試樣經過300~600℃， 30min退火空冷后， 裂紋從波側面擴展到波谷和波峰，同時在波形界面的塊狀FeAl3相中也出現平行于波形界面的裂紋。鋁和鋼的熱膨脹系數有較大差異， 而在界面導致殘余熱應力是造成界面裂紋產生和擴展的主要原因。 由于鋁、 鋼接觸反應時的Kirkendall效應使Fe2Al5層中產生較多的微孔，同時也由于該中間層較厚， 因此微裂紋往往在該層中產生和擴展。 拉剪測試后的斷口分析表明材料主要沿鋁/鋼波形界面失效。
關鍵字: 爆炸焊接； 中間相； Kirkendall 效應； 固/液反應
castings produced by molten aluminum
and explosively welded Cu/steel plate
YANG Xu-yue2, ZHOU Zhuo-ping1
（ 1. School of Materials Science and Engineering,
Central South University,Changsha 410083, China;
2. Mechanical Engineering Department,
University of Electro-communications,Tokyo 182-8585, Japan）
Abstract: Al/steel bonding castings was manufactured by the molten aluminum and explosively welded Cu/steel plate. Crack initiation and propagation at Al/steel interface were investigated by SEM in the as-cast condition as well as in specimens which were heated at various temperatures and then air-cooled. The main cracks are found in the Fe2Al5 continuous intermetallic layer at the ridges of the wavy Al/steel interface and most of these cracks are parallel to the wavy interface. Being heated at different temperatures from 300℃ to 600℃, and then air-cooled, these cracks propagate from ridges to the vales and peaks, and also appear in FeAl3 blocks as well. Most of these cracks are found to be parallel to the wavy interface too. The residual stress due to different thermal expansion coefficients of the interacting phases and the volume change effect associated with the formation of intermetallic compounds, is suggested to be responsible for the crack initiation. Kirkendall effects during the formation of Fe2Al5 result in amounts of tiny holes in this layer, which might facilitate the crack initiation and propagation afterwards.
Key words: explosive welding; intermetallics; Kirkendall effects; solid-liquid interaction
