馬金昌1， 胡君蓉1， 魯雄剛1， 丁偉中1
( 1. 上海大學 上海市鋼鐵冶金重點實驗室， 上海 200072;
2. 上海大學 理學院， 上海 200346)
摘 要: 采用改進的直接固相合成工藝， 制備了SrCe0.95-Yb0.05O3-α固體電解質。 應用AUTOLAB PGSTAT30型電化學工作站測定了不同溫度和不同氣氛下SrCe0.95-Yb0.05O3-α的阻抗譜， 在350~800℃內電導率為6.3×10-5～4.8×10-3 S/cm, 計算得到電導活化能分別為0.63eV(空氣氣氛下)， 0.46eV（水蒸氣氣氛下）。 研究結果表明， 該工藝方法簡單， 能避免材料制備過程中雜質的混入， 且制得的SrCe0.95-Yb0.05O3-α高溫質子導體電性能良好。
關鍵字: 固相合成法; 高溫質子導體; 阻抗譜; 活化能
conductivity of SrCe0.95-Yb0.05O3-α protonic conduction
HU Jun-rong1, LU Xiong-gang1, DING Wei-zhong1
（ 1. Shanghai Key Laboratory for Ferrometallurgy, Shanghai University, Shanghai 200072, China;
2. School of Science, Shanghai University,
Shanghai 200346, China）
Abstract: SrCe0.95-Yb0.05O3-αwas prepared by direct solid-state reaction. The AC impedance spectrums of SrCe0.95-Yb0.05O3-α were measured by AUTOLAB PGSTAT30 electrochemical measuring device at different testing temperatures and gas atmospheres. The conductivity of the electrolyte was 6.3×10-5～4.8×10-3 S/cm at the temperature range of 350～800℃. The activation energies were 0.63eV and 0. 46eV in air and water vapor, respectively. The results show that the improved technique is convenient. It can keep impurity out of the preparing procedure. The prepared high temperature protonic conduction SrCe0.95-Yb0.05O3-αhas good electric performance.
Key words: solid-state reaction; high temperature protonic conduction; AC impedance spectrums; activation energies
