(1. 江蘇大學 材料科學與工程學院，鎮江 212013；
2. 鎮江憶諾唯記憶合金有限公司，鎮江 212009)
摘 要: 通過對TiNiCr形狀記憶合金絲施加不同的預變形，利用拉伸實驗和光學顯微鏡研究不同預變形對TiNiCr形狀記憶合金超彈性和顯微組織的影響。結果表明：預變形對TiNiCr形狀記憶合金彈性有著顯著的影響，TiNiCr合金彈性隨著變形量的增加而增加，當變形量達到51.4%時，彈性的增加不明顯，單純的預變形不能使TiNiCr達到完全的非線性超彈性，但會使TiNiCr產生一種細小板條狀且高度形變的馬氏體變體；當變形量達到48.6%時，馬氏體變體的體積明顯增大，極大地提高了母相的強度，從而顯著提高TiNiCr絲的彈性。
關鍵字: TiNiCr；預變形；形狀記憶合金；非線性超彈性；馬氏體
TiNiCr shape memory alloy
（1. School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, China;
2. Zhenjiang Innov Alloy Co. Ltd., Zhenjiang 212009, China）
Abstract: The effect of the different pre-deformation on superelasticity and microstructure of TiNiCr shape memory alloy was studied by means of tensile test and optical microscope. The results show that the effect of the pre-deformation on superelasticity is obvious. The superelasticity becomes better with the growing pre-deformation. When the deformation reaches 51.4%, the growing rate of superelasticity gets slow. The pre-deformation cannot make TiNiCr obtain complete non-linear superelasticity, but make a kind of fine and highly deformed martensite in TiNiCr. When the deformation reaches 48.6%, the martensite grows with the growing deformation, which increases the intensity of generatrix and the superelasticity of TiNiCr shape memory alloy.
Key words: TiNiCr; pre-deformation; shape memory alloy; non-linear superelasticity; martensite
