( 1. 株洲工學院 機械學院, 株洲 412008;
2. 中南大學 機電學院, 長沙 410083)
摘 要: 針對快速超薄鑄軋材料、 幾何、 摩擦等多重非線性， 將鑄軋輥與板坯之間的力學行為視為熱彈塑性接觸問題， 應用無網格—有限元耦合方法建立了計算模型，該模型較好地解決了板坯劇烈變形有限元網格畸變問題。 對軋制過程中軋制壓力分布進行了分析， 得到其分布規律為軋制壓力在變形區中間區達到最大值， 而在入口和出口處逐漸減少。計算結果基本與實測結果吻合， 說明該計算模型和計算是比較有效和可靠的。
關鍵字: 軋制壓力； 接觸問題； 耦合模型
thin gauge roll-casting
（ Powder Metallurgy and Special Materials Department,
General Research Institute for Nonferrous Metals, Beijing 100088, China）
Abstract: As regarding the non-linearity of thin roll-casting materials, geometry and friction. The mechanics beheavior was taken as thermo-elastoplastic contact problem between the roller and slab. By using Element-Free Galerkin-Finite Element(EFG-FE) coupling method, computation model was established to overcome the inconvenience of applying remesh method, for the slab is deformed greatly which leads to the mesh distortion with the the traditional finite element simulation. The rolling force distribution was analyzed to obtain its character which reaches the maximum value in the centre of the rolling zone, while at the entrance and exit, the stress fades away. The results show that the calculated results by the coupling model are close to the measured ones.
Key words: rolling-force; contact problem; coupling model
