(中南大學 材料科學與工程學院，長沙 410083)
摘 要: 運用取向分布函數（ODF）研究了每個軋制道次的剪切變形特征對高純鋁箔軋制織構的影響。提出用中性角的相對大小來量化軋制剪切變形作用方向改變的位置， 運用Taylor晶體塑性變形理論模擬計算了中性角的相對大小對軋制織構演變的影響。實測與模擬的軋制織構特征表明： 中性角靠近軋制變形區的中心位置有利于形成{001}〈110〉剪切織構， 從而證實了除剪切變形的程度外， 剪切變形方向改變的位置也是影響高純鋁箔軋制織構的重要因素。
關鍵字: 電容器； 高純鋁箔； 軋制織構； 中性角； 剪切變形； 織構模擬
CHEN Zhi-yong, ZHOU Zhuo-ping
（School of Materials Science and Engineering,
Central South University, Changsha 410083, China）
Abstract: Effect of direction change of shear deformation on the rolling textures in high purity Al foils was investigated by orientation distribution function (ODF). The quantitative estimation of relative neutral angle was suggested and introduced into the Taylor-type crystal plasticity deformation model to simulate the rolling textures. It is shown that the condition of neutral angle locating at the middle point of rolling deformation zone favors the development of the {001}〈110〉 shear texture whatever the measured and the simulated ODFs are, which leads to the conclusion that the evolution of rolling textures is contributed by the parameter of relative neutral angle except the magnitude of shear deformation.
Key words: electrolytic capacitors; high purity Al foils; rolling textures; neutral angle; shear deformation; texture molding
